Startguide for your printer
Turn on your printer by pressing and holding the red button for approximately 5 seconds.
Follow these steps to connect the printer to the internet:
Menu > Wireless LAN > Scan Networks
Choose a network and type the WiFi code. Press F1 to change between lowercase / uppercase letters and numbers.
Follow these steps to adjust volume:
Menu > Audio > Key Tone Volume
Choose desired volume by using the arrow
Follow these steps for adjusting time settings:
Menu > Clock > Set Time > Select The Desired Time
Follow these steps to adjust the printing quality settings:
Menu > Settings > Contrast > Press Arrow Until You Reach 13
Print a previous order
Search and find the order you want to print by pressing the down-arrow button. Once you have found it simply press print.
Print more than one order
Follow these steps if you want print more than one copy of an order:
Menu > Manage Device > Settings > General Settings > Number of Prints > Enter the desired number of orders
If you have trouble connecting to the printer, try restarting you printer, disconnect your WiFi and then connect to WiFi again. If you still have connection problems, contact OrderYOYO support.
Keep the printer switched on at all times
Only use the OrderYOYO charger to charge your printer
To cancel an order please contact OrderYOYO support
When purchasing paper rolls, note the dimensions: 57 x 45 x 12 mm
If your printer display shows “DNS-issue”, contact OrderYOYO support
Make sure to always have the black roller inserted in the printer. If the black roller is not inserted, the printer will not be able to print the order. If you have lost the black roller, or it is unable to roll correctly, please contact OrderYOYO support to have it replaced. Note, the white gear should be on the left side.